M7 Bayonet Handle Grip New-Old Stock (NOS) screw and washer (lots of 2)

Description

M7 Bayonet Handle Grip New-Old Stock (NOS) screw & washer (lots of 2)
This listing is for two M7 Bayonet grips screws and washers.  Tested on the M7 Bayonet and they are a perfect fit.  These screws and washers are new and unissued.  Screws will also fit the M6 Bayonet.
(You will receive two (2) screws and two (2) washers for a total of four (4) individual pieces).
Pictures listed will not be the exact item you receive, but are shown as stock photos only.
Screw NSN: 5305-00-051-3609
Washer NSN: 5310-00-579-0079
Technical Data | NSN 5305-00-051-3609
Characteristic
Specifications
THREAD SERIES DESIGNATOR
UNC
NOMINAL THREAD DIAMETER
0.138 INCHES
THREAD QUANTITY PER INCH
32
THREAD CLASS
2A
THREAD DIRECTION
RIGHT-HAND
THREAD LENGTH
0.647 INCHES MINIMUM AND 0.687 INCHES MAXIMUM
FASTENER LENGTH
0.750 INCHES NOMINAL
SCREW MATERIAL
STEEL
SCREW SURFACE TREATMENT
PHOSPHATE
HEAD STYLE
A38 FLAT CHAMFER
HEAD DIAMETER
0.226 INCHES NOMINAL
HEAD HEIGHT
0.132 INCHES NOMINAL
INTERNAL DRIVE STYLE
B10 SLOT
MANUFACTURERS CODE
19204
DESIGN CONTROL REFERENCE
11010078
Technical Data | NSN 5310-00-579-0079
Characteristic
Specifications
MATERIAL
STEEL COMP 1050 OR STEEL COMP 1551 OR STEEL COMP 1059 OR STEEL COMP 1060 OR STEEL COMP 1561 OR STEEL COMP 1064 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION
66 FED STD ALL MATERIAL RESPONSES OVERALL
SURFACE TREATMENT
CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
HARDNESS RATING
40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM
STYLE DESIGNATOR
101 FLAT INTERNAL TEETH
HOLE DIAMETER
0.141 INCHES MINIMUM AND 0.150 INCHES MAXIMUM
OUTSIDE DIAMETER
0.275 INCHES MINIMUM AND 0.295 INCHES MAXIMUM
MATERIAL THICKNESS
0.017 INCHES MINIMUM AND 0.021 INCHES MAXIMUM
MANUFACTURERS CODE
81349
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE
MILW6986